Handrix Specialty Fabrication Home Handrix Specialty Fabrication Products Handrix Specialty Fabrication Contact Handrix Specialty Fabrication

Metal Fabrication and Piping Specialty Products

Piping Specialty Products Plate Products Fabricated Strainers
Specialty Products Structural Steel Fabrication  
Fabrication Area: Approximately 13,000 square feet
Crane Capacity: 10,000 pounds
  • Carbon Steel

  • Chrome-Moly

  • Stainless Steels

  • Nickel Alloys

  • Copper-Nickel Alloys

Piping Specialty Products


Temporary (Start-Up) Strainers

Sizes from 1” to 72”, 150# to 2,500# A.N.S.I., Raised Face, RTJ (Male or Female), Carbon Steels, Stainless Steels, and High Alloys are available.

  Standard is 1/8” perforated by 150% length. Strainers can be specifically designed or built to customer specifications.
  Temporary Strainers are designed to be used for system start-up or in situations where a temporary amount of contamination may occur. They are not recommended for extended periods of usage. These temporary strainers are usually mounted in a pipe spool, which may also be manufactured at the customer’s request.

Plate Products

Sizes from ½” to 72”, 150# to 2,500# A.N.S.I., Raised Face; RTJ (Female), and RTJ (Male Octagonal), Carbon Steels, Stainless Steels, Chrome-Moly; and other available Alloys.
Spectacle Blind, Blank, Spacer,
Drip Ring / Bleed Ring
Raised Face is available in “Mill Finish” or “Serrated Machine Finish” (125-250 Standard). “Mill Finish” not recommended over 300# A.N.S.I.
O.D., I.D. and thickness are per API-590. API-590 style tie bars will be supplied only if requested.
Special Items with Extra Raised Faces per A.S.M.E. B16.48 can be supplied. This must be requested at the time of purchase.

Fabricated Strainers

VIS Vertical Inline    
Sizes from ½” to 60”, 150# to 2,500# A.N.S.I.

Vertical Inline Strainers can be manufactured with flanged or quick opening closures. Generally they have 400% + open area (based on perforated-only baskets).
TS Tee    
  TS: Sizes from 2” to 72”, 150# to 2,500# A.N.S.I.

Tee Strainers can be straight through flow or angle flow. They have much less basket area than a VIS and are used in areas with less contaminant. Quick open closures are available.
HFYS "Y"    

Sizes from 2” to 72”, 150# to 2,500# A.N.S.I.

Fabricated “Y” Strainers have more basket area than the TS and are less expensive than the VIS. This may solve your special problems.
Note: May not fit in the envelope of a “cast unit”.

Bodies: Carbon Steel, Stainless Steels, Chrome-Moly, and some Exotic / High Alloy materials are available

Baskets: Manufactured from available perforated and mesh materials

Codes: A.S.M.E. / A.N.S.I. B31.1, B31.3, B31.4 and B31.8
Design to A.S.M.E. Section VIII, Division I with a “U” Stamp is also an option.


Specialty Products

Condensate / Seal Pots of carbon steel, stainless steels, and other alloys can be manufactured. Sample Cooler / Heater - Bodies in carbon steel or stainless steels. Coils are available in carbon steel, stainless steels and other alloys. Designs available for high and low pressure, open and closed.
Quotations available for customer designs.
Lateral Fabricated Tee Fabricated Cross Stub End Pipe Spool
Carbon steel, stainless steels, chrome-moly, and other alloys may be available on request. “As welded” or “x-ray and P.W.H.T.” available on request. Please call for pricing.

Plate flanges and “Flat” studding outlets can be machined. Almost any commercially available material can be used. Please call or fax your inquiries for quotation.

Pigging Launchers / Receivers and Small Pressure Vessels per customer engineering specifications. Our facility can handle items up to 10,000 pounds, 48 inches in diameter and 30 feet in length. Skid mounting of items on structural skids is available.
Pig Launchers / Receivers Small Pressure Vessels

Structural Steel Fabrication

Stairs, walkways, ladders, support structures and miscellaneous structural items

No job is too small

Custom Designs / Customer Designs
Call, fax, or use the contact form for a quotation on any item



Home | Products | About | Contact

Special Customer Designs / Specifications Accepted

13720 FM 529 Suite 500
Houston, TX  77041

Phone: 713-466-6888
Fax: 713-466-6862

TOLL-FREE: 1-866-557-6888
E-mail:  info.hendrix@hendrixfabrication.com

Copyright ©  Hendrix Specialty Fabrication Inc.

Web Site Design
& Maintenance by: